配電工作界面翻譯-中英對照
With working interface of power distribution
1 FIDS所有前端用電設備的配電由配電系統承包商負責。對于每個TFT-LCD顯示位置(含TFT-LCD顯示屏及屏組、前端顯示控制機) ，配電系統工程承包商提供一路單相三線220V、50Hz交流電源。電源插座為國標。
1. The power distribution of all front electrical equipment is in the charge of the contractor who provides one-circuit single-phase three-wire 220V, 50Hz AC power supply for each TFT-LCD display position (including TFT-LCD and screen unit, front display controller). The socket of power supply complies with the National Standard.
2 FIDS所有硬件設備的配電線路和電源插座等相應的設備、材料及工程由配電系統工程承包商負責提供并實施。承包商提供從現場電源插座到TFT-LCD顯示屏相匹配的電源線纜，并完成端接。
2 All power distribution lines and power sockets for FIDS as well as corresponding equipment, materials and works shall be supplied and implemented by the contractor. The contractor is responsible for power sockets in the field and cables matched for TFT-LCD with end connection finally.
與標識引導系統的工程界面
With engineering interface of marker guidance system
3 TFT-LCD顯示屏的支架由標識引導系統提供。承包商須在FSI的統一管理下，與標識引導系統緊密配合，承包商需向標識引導系統承包商提供TFT-LCD顯示屏及前端顯示控制機的重量、尺寸、安裝方式、安裝加固方式、安裝圖等要求，并配合標識引導系統完成現場安裝施工圖。負責協調并確認安裝施工圖的正確性。
3. The support of TFT-LCD is provided by the marker guidance system. The contractor must cooperate with the marker guidance system well through centralized management of FSI. The contractor shall offer the weight, dimension, installation mode, installing and fastening methods, installation diagrams of TFT-LCD and front display controller to the contractor of marker guidance system and complete on-site installation drawings by working with the marker guidance system, coordinating and confirming the correctness of drawings.
4 在標識引導系統需要TFT-LCD顯示屏樣品進行支架試安裝時，承包商需提供并緊密配合。
4 When TFT-LCD sample is required for the marker guidance system during support installation, the contractor shall make good contribution to it with necessary assistance.
5 承包商將全面負責完成將本合同所供TFT-LCD顯示屏的安裝到標識引導系統提供的安裝基礎(支架) 上所涉及的各項工作。
5 The contractor shall be fully responsible for installing TFT-LCD onto the installation base (support) of the marker guidance system and other related work.
設備采購/安裝的工作界面
The working interface of equipment procurement/installation
承包商負責TFT-LCD的安裝，應積極配合the Employer與FSI、標識引導、配電等承包商在安裝方面的技術協調與配合，并對工作作出具體安排。所有的工作安排必須取得the Employer的書面同意，如果發生爭議，應由the Employer裁決，各方都應遵守，并不得籍此要求增加費用或延長工期。
The contractor shall be responsible for the installation of TFT-LCD and coordinate with the Employer and contractors of FSI, marker guidance, power distribution on aspects of installation through technical coordination and cooperation, making detailed arrangement. All working arrangement shall be approved by the Employer in written form. Any dispute should be determined by the Employer and complied by each party and it is not allowed to ask for additional charges or prolonged construction period.
投標方在提供投標技術文件的同時提供設備(TFT-LCD 顯示屏、附帶控制軟件和數據線的PC一套) 樣品并加以說明。投標方須在投標截止日前20天提供用鋁合金把后蓋進行全封閉的顯示屏樣品，送至招標方指定的地點進行烤機，直至評標結束。以上投標方提供的顯示設備樣品必須是通電后就能進行顯示演示，評標后這些樣品將被封存，合同談判結束后，the Selling Party的樣品被繼續封存，其它投標方的樣品將全部退還。
The bidder shall provide bid technical documents as well as sample of equipment (TFT-LCD, a set of PC with accessory control software and data line) with instruction. The bidder must provide a sample of display screen with the back cover being sealed by aluminum alloy for 20 days before the deadline of bidding and submit it to the location fixed by the tenderee for appraisal. The sample of display screen offered by the bidder must be able to indicate and display after switching on, which shall be sealed after appraisal. After the negotiation on the contract, the sample provided by the Selling Party will be sealed still, and other samples will be sent back.
投標方應提供產品的各項技術指標和性能測試報告等檢測證明，如果應答書內容與檢測證明內容不一致，以檢測證明為準。the Employer保留對產品各項技術性能指標進行驗證的權利，如果指標不符實，投標方將承受被廢除中標資格的風險。
The bidder shall provide technical index and performance testing report of the product, etc. If the content of the responding letter is inconsistent with the testing report, the testing report is regarded as the standard. The Employer preserves rights to inspect technical and performance index of the product and the bidder shall take risk of being exempt from qualification in bidding.
在深化設計及訂貨之前the Employer保留對TFT-LCD安裝方式等內容變更的權利，the Selling Party不得因此向the Employer提出索賠和增加任何費用，投標人應在投標報價中充分考慮此部分費用。
Before further design and making order, the Employer shall preserve rights to change installation mode of TFT-LCD and the Selling Party shall not raise a claim on the Employer for any additional charges and the bidder shall take all charges into account during bidding.
TFT-LCD顯示屏技術要求
Technical requirement of TFT-LCD
TFT-LCD顯示屏是航顯系統前端主要的顯示設備之一，其可靠性是保證航顯系統前端正常顯示的關鍵。因此，該設備是應能滿足24小時不間斷運行要求的顯示屏(非液晶電視) 。其具體要求如下：
TFT-LCD is one of the main equipment in flight information display system, which takes a key role in normal display for the system. Therefore, this equipment shall meet demand of running 24 hours without shutdown. The detailed requirements are as below:
外殼顏色：與標識引導系統選用色系相協調。
Color of shell: be in harmonious with the color of the marker guidance system.
安裝方式：支持吊裝和支架安裝，有原裝的安裝支架和吊架。
Installation mode: be available for hoisting erection and support installation with original support and hoisting bracket.
2013.12.21